- #MODEL HCVR5108H RED ALARM LIGHT BLINKING INSTALL#
- #MODEL HCVR5108H RED ALARM LIGHT BLINKING MANUAL#
Plug the printer back in, then turn the printer back on. Turn the printer off, then unplug the printer from the power supply. These error indicate a hardware failure and are generally unrecoverable.ĭisconnect the printer cable from the printer. Power Lamp Flashes Green and Alarm Lamp Flashes Orange AlternatelyĪ printer problem has occurred. If a PictBridge compliant device is connected via a USB hub, remove the hub and connect it directly to the printer. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition. With this operation, the printer will stop monitoring the remaining ink level for the ink tank(s) in question. Printing under the current condition may damage the printer. Refer to Routine Maintenancefor additional information to check the ink tank status.Īn Ink tank error has occurred. The ink tank is not compatible with this printer. If the function for detecting the remaining ink level is disabled, the ink tank is displayed in gray on the printer status monitor (Windows) and Canon IJ Printer Utility (Macintosh ®). With this operation, the printer will stop monitoring the remaining ink level for the ink tank(s) in question. Please be advised that Canon shall not be liable for any printer malfunction or damage caused by refilled ink tanks. Press and hold the RESUME / CANCEL button for at least 5 seconds, and then release it.
If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Printing with an ink tank that was once empty may damage the printer. Replace the ink tank and close the Top Cover. The remaining ink level cannot be correctly detected.
#MODEL HCVR5108H RED ALARM LIGHT BLINKING MANUAL#
You may also have to turn on your device or select Play mode manually after connecting the device to the printer. Refer to its instruction manual and perform the necessary operations before connecting your device. When printing from a PictBridge compliant device, depending on the model or brand of your device, you may have to select a PictBridge print mode on the device before connecting it to the printer. If the error is still not resolved, check if you can print another photograph. In such cases, disconnect and reconnect the USB cable. Printing photos directly is possible only with a PictBridge compliant device.Ī communication time out occurs if an operation takes too long or if it takes too much time to send data. The digital camera or digital video camcorder connected is not compatible with this printer.Ĭheck the device connected to the printer. The printer has not received a response from the digital camera. Press the RESUME / CANCEL button on the printer to cancel the error so you can continue printing. The printer has a built-in ink absorber to hold the ink used during Print Head Cleaning. Refer to Routine Maintenance and confirm the ink tanks are installed accurately.
(The lamps on the ink tanks flash.)Ĭonfirm that the ink tanks are installed in the appropriate positions. More than one ink tank of the same color are installed. Some ink tanks are not installed in the correct position. Ink tank is not installed in the correct position. Or if you still need help, visit our Canon Community by clicking the button below to get answers: If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options. If the Print Head is already installed, remove the Print Head once and then reinstall it.
#MODEL HCVR5108H RED ALARM LIGHT BLINKING INSTALL#
Print Head is defective.įollow the directions given in your setup manual to install the Print Head. If multiple ink lamps are flashing, refer to Routine Maintenance and confirm the status of each ink tank. The printer may be damaged if printing is continued under the ink out condition. Replacing the ink tank is recommended after the printing. If printing is in progress and you want to continue printing, press the RESUME / CANCEL button with the ink tank installed. If the lamp on the ink tank is flashing, ink may have run out. If the lamp on the ink tank is not lit, the ink tank may not be installed properly. Remove the jammed paper, reload paper properly in the printer, then press the RESUME/CANCEL button on the printer. If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. If the Paper Output Tray is closed, open it. Reload paper in the Rear Tray or Cassette and press the RESUME / CANCEL button on the printer. Count the Alarm light flashes on your printer and take the appropriate action to correct the error described below. The number of flashes indicates the type of error that has occurred.
(A) Notes the number of flashes, and (B) represents flashes repeatedly. When a printer error occurs, the Alarm lamp flashes orange as shown below.
0 kommentar(er)
